Double Glazing Lock Repair
Double-glazed windows are a favorite choice for homeowners looking to improve the energy efficiency and security of their home. They are susceptible to being damaged or worn out over time.
Many double glazing problems can be resolved without having to replace the window unit. By lubricating and tightening the screws, you can fix sagging windows or handles, as well as misting or stiff handles.
Locks that are damaged or worn out
If a lock has been damaged or worn out, it could be quite dangerous and leave you vulnerable to burglaries. This can be caused by general wear and tear, or even damage from burglars. However, repairing or replacing the locks can be relatively simple if you know what to look out for.
A common issue for double glazing window handles is that they may be difficult to open. This is usually due to a defective locking mechanism, which can make the handle jam when trying to close it or to open. If you experience this issue it's a good idea to locate a local double-glazing locksmith who can offer new window handles and locks.
Another issue with window locks made of uPVC is that they could be misaligned, preventing the door from locking properly. This can be due to a variety of reasons, such as improper installation or weathering. In some cases, you can correct this by removing the weatherstripping and moving it further back. In other instances, you might need to replace the cylinder, or alter the strike distance on the outside of your door frame.
It is important to select an expert lock repair service with skilled technicians, as this will ensure that the task is done correctly. Check out reviews from customers to see what others have to say about their experience with them. Make sure the business is insured and comes with written warranties to make sure you feel at ease about their work.
If you are having trouble locking your uPVC window, use a silicon spray on the lock. This can loosen the stuck bolts and allow them to engage with the keyhole. It's also recommended to oil the lock frequently, so it doesn't become stiff and unresponsive after a while.
A faulty lock can also be an indication that it has been tampered with or picked, so you should change your locks as soon as you can. This is especially important when you have recently moved into a new home, as copies of the original keys might still be floating around in the possession of previous tenants.
Locks That Are Hard to Open
The most common issue double-glazing owners complained about in our survey was the windows and doors becoming difficult to open or close. In the majority of cases, these issues can be solved without having to replace the whole door or window. In certain cases it is possible to lubricate the hinges, handles and mechanisms can fix the issue. If this isn't working, it could be worthwhile to have an expert locksmith take a deeper look to determine what the root of the issue is.
Often, a lock becomes difficult to open because it has become hard or sticky. This can be caused by dirt, heat or due to the use of the wrong key. A professional will determine if this is the case and can repair the lock, usually without having to replace it.
A good way to lubricate the lock is with graphite powdered in a powdered form. It is available in small tubes from most hardware stores and auto shops. You can use it by putting some in the keyhole and then inserting the key several times into the lock to spread the graphite. You can also draw the lead from a pencil that is soft but be sure it is made from genuine graphite and not just wood shavings. Graphite will help lubricate the lock and make it easier to open.
The cylinders may not be aligned properly, which can cause the locks to be stiff or sticky. This can happen if the door has been slammed on occasion and can be solved by re-aligning locks. The door might also be difficult to open when the hinges are loose. If this is the scenario, the door hinges should be tightened.
A broken key inside the lock is a common cause of a door being locked. This could be a major security risk since it takes only 30 seconds for an intruder to cut off a typical euro barrel cylinder. It can be a challenge to remove the broken piece from the lock, but it is achievable with an flathead screwdriver, needle nose pliers, and a bit of patience.
Locks that aren't functioning properly
Window that won't shut properly can be more than an inconvenience. They can allow in drafts and cause damage to your home's security as well as increase your energy costs. Burglars typically use windows that are open to gain entry to your home. Installing secure locks on the windows is a great way to keep them out. If your window locks do not function properly, they must to be repaired as quickly as possible to prevent them from becoming more of a problem.
There are a variety of reasons your uPVC window may not lock properly. The first is that the bolts could have become misaligned. This can be caused by repeated slamming, swelling and contraction in cold and hot weather, or simply from general wear and wear and tear. This can cause the bolts be stopped from throwing into the locking position, meaning they won't interlock correctly when you push the handle to close.
A malfunctioning locking system could be the reason. If you have a Saracen Lock on your window, it could be the reason. These are commonly found on uPVC casement windows with aluminium frames. They are characterized by their flat-strip shape, and when they turn they work in tandem to secure the window shut. They also come with a high security upgrade to offer additional security against forced entry.
When you are experiencing problems with your uPVC double-glazed window the best thing you can do is get in touch with a dependable and experienced professional. They can inspect your window to pinpoint the problem. This will save you money by avoiding having to replace the entire window unit.
They can also identify the problem much faster than you'd think. This is because they can identify the window's model over the phone and can find a quick replacement part for you at a reasonable cost. double glazing repair Tottenham can then fit this part to your uPVC windows without having to replace the entire mechanism.
Replacement
Owen the Locksmith offers a range of replacement locks for your uPVC double glazing, uPVC windows or doors. There are single point locks, multipoint locking systems and various types of handles. Also available are various hinges, striker plates and various handles. Our team can reconfigure uPVC and double glazing mechanisms to function differently, based on your lifestyle and the way you use your windows and doors.
One of the most common issues with uPVC windows and doors is that they lose their ability to shut properly and can cause water damage and draughts in your home. This is usually a sign that the gasket seals have shrunk and no longer hold in the insulating gas between the panes of glass. If you find that this is the case, call the company who installed your double-glazed windows and ask them to replace the gasket seals.
This is a much cheaper alternative than replacing the entire window unit. It also helps you save money by allowing more warm air in your home. If you decide to replace your window seals, make certain to purchase them from a reputable manufacturer.
One of the most common issues common to uPVC doors and windows is that they become difficult to open. This is typically due to stiff hinges or a damaged system. You can try DIY solutions such as cooling the hinge down or the mechanism islubricated. If this doesn't work, you may need to call an expert.
Most people install quality anti-burglar equipment on their front doors and gates however, they tend to neglect the windows. A broken lock can compromise your home's security. It is crucial to fix a faulty lock as soon as you can. A faulty one can allow unwanted guests into your home. There are glaziers that can repair your uPVC window problems including damaged handles and defective locking mechanisms. They can do so without compromising the appearance of your home.